![]() |
TECHNOBLOCK - heat-insulating board based on rock woolRock wool produced by TechnoNICOL is divided into different types according to the field of application. The assortment includes heat insulation for plaster and ventilated facades, pitched and flat roofs, floors, walls, etc. In 2008, TechnoNICOL Corporation presented innovative heat insulation - double density boards. TechnoNICOL products are distinguished by high heat-saving capacity, fire safety, good sound absorption, hydrophobic properties, strength, and deformation resistance. All TechnoNICOL heat-insulating materials are produced in accordance with technical specifications and are certified and environmentally safe. TechnoNICOL rock wool production plants are fitted with high-tech equipment. TechnoNICOL has created the Research and Development Center. Its main objectives are in-depth analysis of the properties of raw materials, finished products, technological processes, and information in order to use the most modern and effective means for manufacturing the highest quality products. In order to achieve maximum satisfaction of both external and internal customers, the company actively uses the principles of total quality management. Environmental safety is closely connected with production security. The labor protection system of the enterprise is supported at the highest level. Application features of TECHNOBLOCK mineral wool boardsTECHNOBLOCK boards are used to fill cavities of building structures, as well as a layer in the sound-insulating systems of buildings. When installing on inclined and vertical surfaces, TECHNOBLOCK insulant is secured by means of standard fasteners. The use of fasteners is optional during installation on horizontal surfaces. Installation of this product does not require any special building implements, as well as special knowledge and skills. Nevertheless, when working with TECHNOBLOCK insulant, basic safety rules should be observed through the use of personal protective equipment. Additional fire protection is not required, since TECHNOBLOCK is made of non-combustible materials. There is no need for maintenance and repair during usage of the boards, since they are made of mineral raw materials: TECHNOBLOCK insulant does not change its properties over time and there is no significant load on the load-bearing elements of building structures. Dimensions:Length - 1,000, 1,200 mm Width - 500, 600 mm Thickness - 40-200 mm (with increments of 10 mm) Application areasTECHNOBLOCK boards are recommended for heat and sound insulation of various types of layered masonries and frame walls (including exterior ones) with different types of finishing (including siding). In addition, these boards can be used as the first (internal) heat-insulating layer in curtain facade systems with an air gap for a two-layer heat insulation scheme. Table of material properties
Property TECHNOBLOCK STANDARD Compressibility, %, not more than 8 Heat conductivity at 10°C, W/(m·°C), not more than 0.035* Heat conductivity at 25°C, W/(m·°C), not more than 0.037* Heat conductivity under A-type application conditions, W/(m·°C), not more than 0.039* Heat conductivity under B-type application conditions, W/(m·°C), not more than 0.040* Vapor permeability, mg/(m·h·Pa), not less than 0.3 Humidity by weight, %, not more than 0.5 Water absorption by volume, %, not more than 1.5 Content of organic substances, %, not more than 2.5 Flammability grade Non-combustible Average density, kg/m3 40-50 *According to TA No. 3656-12 Storage The boards should be stored in covered warehouses. It is allowed to store boards under shelter protecting them from exposure to atmospheric precipitation. During storage the boards should remain in containers or in piles on pallets or pads. The piling height should not exceed 2 m during storage. Specification
Packaging
TECHNOBLOCK boards are made of non-combustible materials. The operating temperature ranges from -60°C to +400°C. The melting point of fibers is more than 1,000°C. Application features of TECHNOBLOCK mineral wool boardsTECHNOBLOCK boards are used to fill cavities of building structures, as well as a layer in the sound-insulating systems of buildings. When installing on inclined and vertical surfaces, TECHNOBLOCK insulant is secured by means of standard fasteners. The use of fasteners is optional during installation on horizontal surfaces. Installation of this product does not require any special building implements, as well as special knowledge and skills. Nevertheless, when working with TECHNOBLOCK insulant, basic safety rules should be observed through the use of personal protective equipment. Additional fire protection is not required, since TECHNOBLOCK is made of non-combustible materials. There is no need for maintenance and repair during usage of the boards, since they are made of mineral raw materials: TECHNOBLOCK insulant does not change its properties over time and there is no significant load on the load-bearing elements of building structures. |